NASA’s Northrop Grumman CRS-23 Info and Hardware

Northrop Grumman Commercial Repaply Services of NASA 23, or Northrop Grumman CRS-23, will provide more than 11,000 pounds of science and supplies at the international space station. This mission will be the first flight of the Cygnus XL, the larger and more compatible version of cargo from the company’s solar space.

The Cygnus XL will be launched on a SpaceX Falcon 9 rocket from the Space Force Cape Canaveral station in Florida. After the arrival, astronauts aboard the space station will use Canadarm2 to tackle Cygnus XL before installing the spacecraft robotically on the port facing the land of the Unity module for the unloading of the cargoes. Distribute the live launch and the arrival coverage on NASA +, Amazon Prime, Youtube.

Ida Planar Reflector – This is a reflective element used by visiting spaceships during mooring. The spacecraft bounces a laser out of the reflector to calculate the relative range, speed and attitude of the international space station approach. Due to the degradation found on the installed reflector, this unit will be launched to take charge of a future space step to replace the damaged reflector.

Urine treatment distillation assembly (UPA) – The urine processor on the space station uses filtration and distillation to separate water from wastewater to produce drinking water. This unit is launched as a spare.

Reactor health sensor – part of the environmental control system and the survival system – Water treatment assembly, includes two sensors with input and output ports to measure the health of the reactors. This unit is launched as a spare.

Pressure management device – This is an intravehicular activity system to pressurize and depressurize the actors of the space station between the hatching of the space station and the hatching of a visiting spacecraft or another module, such as the Nanoracks SAS. During depressurization, most of the air will be added to the air cabin’s cabin to save the precious resource.

Air selector valve – This electro-mechanical set is used to direct the air flow through the disposal set of carbon dioxide. Two units are launched like spare parts.

Mass spectrometer assembly of major constituent analyzers – This assembly monitors the partial pressure levels of nitrogen, oxygen, hydrogen, methane, water vapor and carbon dioxide on board the station. This unit is launched as an emergency spare.

Mass mass sample / mass series of major constituent / series – This contains the plumbing and a pair of electricity to direct the sample gas flow to one or the other of the redundant sample pumps. It attracts a gas sample from the atmosphere of the space station in the analyzer. This unit is launched as an emergency spare.

Assembly of distribution of main analyzer samples of the constituents – This isolates the gas sample going to the assembly of the mass spectrometer. The goal is to distribute gas samples throughout the analyzer. This unit is launched as an emergency spare.

Wooden bed – The bed allows the trace contaminants control system to eliminate high molecular weight contaminants from the station’s atmosphere. This unit is launched as a spare.

Common cabin air assembly exchanger – This assembly controls the airline temperature of the cabin, humidity and air flow aboard the space station. This unit is launched as a spare.

Sequential shunt unit – this regulates the tension of the solar wing when it experiences high levels of direct sun; In doing so, it provides a power supply to the main supply system of the station. This unit is launched as a spare.

Solid state lighting assembly – This is an internal lighting assembly specialized aboard the station. NASA will use a lighting assembly to replace a stranded unit and will keep others as spare parts.

Type V distance power supply module – This module distributes 120 V / DC electrical power and provides power limit protection and defects with secondary loads on board the orbit laboratory. This module is launched as a spare.

Insoloring set on treadmill – The assemblies of upper insulator, X, Y and Z are launched as spare parts for the treadmill of the space station, where they work together to reduce vibrations and the transfer of force when astronauts work.

Fan engine controller – The controller is an electronic controller to modulate the power with the engine windings, which are conductive wire coils which are wrapped around its nucleus carrying an electric current to drive the engine. The windings are commonly used in household appliances, cars (electric steering), pumps, etc.

Quick donation mask assembly – This mask is used by the crew, as well as the assembly of pre-appression, in emergency situations. This unit is launched to replace a unit on board the station.

Anomaly gas analyzer – This analyzer detects various gases, such as oxygen, carbon dioxide, carbon monoxide, ammonia and others, as well as cabin pressure, water vapor and temperature. Two units are launched as upgrade to the current analyzer system used on board.

Oxygen oxygen maintenance kit – A nitrogen tank and an oxygen tank used for gas replenishment aboard the space station are launched to maintain gas reserves.

Translation of the crew and lighting equipment – This is a lighting unit used on board the station to light up the astronauts equipment cart and the surrounding work areas during space balls.